Cork Porous Biocomposites with Polyurethane Matrix Modified with Polyol Based on Used Cooking Oil.

Renewable materials are materials that are replenished naturally and can be used again and again. These materials include things such as bamboo, cork, hemp, and recycled plastic. The use of renewable components helps to reduce the dependence on petrochemical resources and reduce waste. Adopting these materials in various industries such as construction, packaging, and textiles can lead to a more sustainable future and decrease the carbon footprint. The presented research describes new porous polyurethane biocomposites based on used cooking oil polyol (50 per hundred polyol-php) modified with cork (3, 6, 9, and 12 php). The research described here demonstrated that it is possible to replace some petrochemical raw materials with raw materials of renewable origin. This was achieved by replacing one of the petrochemical components used for the synthesis of the polyurethane matrix with a waste vegetable oil component. The modified foams were analyzed in terms of their apparent density, coefficient of thermal conductivity, compressive strength at 10% of deformation, brittleness, short-term water absorption, thermal stability, and water vapor permeability, while their morphology was examined using scanning electron microscopy and the content of closed cells. After the successful introduction of a bio-filler, it was found that the thermal insulation properties of the modified biomaterials were comparable to those of the reference material. It was concluded that it is possible to replace some petrochemical raw materials with raw materials of renewable origin.

Creep Age Forming of Fiber Metal Laminates: Effects of Process Time and Temperature and Stacking Sequence of Core Material.

Fiber metal laminates (FMLs) are a type of hybrid materials interlacing composites and metals. In the present work, FMLs with aluminum alloy 6061 as the skin and E-glass fiber-reinforced polypropylene (PP) as the core material are fabricated and formed by the creep age forming (CAF) process. The effects of time and temperature as the process parameters and thickness and stacking sequences of composites layers as the FML parameters are evaluated on the springback of glass-reinforced aluminum laminates (GLARE) FMLs. After the CAF process, the springback of creep age-formed FMLs is calculated. The results show that the FMLs can be successfully formed with the CAF process by considering appropriate time and temperature. In addition, the stacking sequence of composite layers can affect the springback behavior of FMLs significantly.